| Customization: | Available |
|---|---|
| Type: | Water Jet Loom |
| Voltage: | 415V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| HJ-408# | ||
| No. | NAME | ORIGIN\TYPE\PERFORMACE DECRIPTION |
| 1 | Wall board | We adopt HJ-408 special heavy enhanced, according to TSUDAKOMA Drawing,HT220-230 standard material,large CNC precision machining. |
| 2 | Gear in the wall board | Adopt Taiwan Datong(TTG) gear, ultra-quite,wear-resistant,low vibration and high precision. |
| 3 | Bearing in the large box | Bearings inside are Sweden SKF, Bearings outside are made in japan. |
| 4 | Beating up shaft | 114 * 10 reinforced, heat treatment of qualitative, sandblasting, 11 feet, Tsudakoma standard beating-up axis. |
| 5 | Slay | SUS304 stainless steel reinforced,supplied by the top manufacture in china, achieve cloth smooth. |
| 6 | Stripe | Italy brand---Tianqi stripe, strengthening take-up. |
| 7 | Plastic stocks | New type and high quality plastic parts. |
| 8 | Beam | Adopt Tsudakoma structure to design, the beam up and down side are using double Angle, thickness is 12 mm. |
| 9 | Folder yarn tackle | Electronic. |
| 10 | Suction pipe | ∮76mm,thickness 6mm,SUS 304 stainless steel material. |
| 11 | Cross beam | heavy and lengthen treatment. |
| 12 | Tension spring | ∮12mm |
| 13 | Panel | HJ-408 Special type |
| 14 | Let-off and take -up device | Mechanical or electronic |
| 15 | Temple bar,guide |
HJ-408 Special type ,3mm stainless steel |
| 16 | Temple | Five ring three rows of fine needle puncture (0.3mm) under the pressure of Temple (made fine denier fabric cloth smooth) South Korea Renhe or Jilong brand. |
| 17 | Leno parts | Assembly is made in Taiwan (slide: stainless steel, low noise leno assembly, smooth operation and long service life). |
| 18 | Main motor | Red flag brand only supplied for HJ, power is 2.8KW(cam is 2.2 KW). Save electricity, fast start, low noise, little park, long life and other advantages (inside bearings, HJ imported from Japan directly, NACHI brand). |
| 19 | Electronic Control System | XINLIAO BRAND. |
| 20 | Measuring | Electronic measuring |
| 21 | Feeler | Photoelectric weft |
| 22 | Stopwatch | Electronic. |
| 23 | Plug | Shutai ceramic (36/26 or 36/28 mm). |
| 24 | Pump spring | AWA JAPAN OR TAIWAN pump spring. |
| 25 | Nozzle |
Korea MDH. |
| 26 | Single valve | AWA JAPAN or Korea Tae beac. |
| 27 | Oil seal | Made in TAIWAN. |
| 28 | Cutter | joint bearings made in TAIWAN , scissors, scissors spring, improve efficiency. |
| 29 | Suction motor | Mechanical energy saving type suction motor(can choose electronic one). |
| 30 | Regulated water tank | Double filter, bucket type. |
| 31 | Lifting heald rod bushing | America DuPont materials production, wear-resistant, long using life. |
| 32 | Heald frame | XIANGRUI brand, aluminum material cross the head above is 10cm, following is 12 cm. |
| 33 | Painting | TSUDAKOMA yellow color, twice primer, paint once again, special paint production lines, improve the rust effect. |
| 34 | Stainless steel screws of whole machine | Taiwan DONGMING SUS304 stainless steel screws, not rust. |
| 35 | Waterproof device | TSUDAKOMA type transparent waterproof cover. |
| 36 | False-twist spindles | After the pull-out. |
| 37 | Yarn shaft | Double nozzle generally used shaft. |
| 38 | Feeler seat |
Feeler seat can be adjusted in front and back, up and down. |
| 39 | Effective width | 145cm-208cm. 145cm-208cm. |
| 40 | Cast | Confirmed with top supplier, manufacturing by the standard drawings, guarantee the material and quality. |
){kind=link}