| Type: | Water Jet Loom |
|---|---|
| Voltage: | 380V |
| Computerized: | Computerized |
| Precision: | High Precision |
| Certification: | CE, ISO9001: 2000 |
| Warranty: | 1 Year |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| No | Item | Configuration |
| 1 | Machine Model | HW-8010-280 with Dobby shedding,improved beating system based on TSUDOKOMA ZW-8100. |
| 2 | Useful reed space | The effective reed width of HW-8010-280 with crank shedding is 215cm-278cm |
| 3 | Wall board | We adopts HJ-8010 special heavy enhanced, according to TSUDAKOMA Drawing,HT220-230 standard material, large CNC precision machining wallboard. |
| 4 | Drive system | VEICHI motorized spindle system, used together with frequency converter, saves about 25% of annual power. |
| Push button switches for start,stop,inching and reverse inching. | ||
| 5 | Gear in the large box | AdoptingTaiWan(TTG)gear,ultra-quite,wear-resistant,low vibration and high precision. |
| 6 | Bearing in the large box | Bearing in the large box made in Swedish or Germany , Bearing out of the large box made in Japan. |
| 7 | Beating system | The specially treated U-shaped beating up shaft is adopted,If the yarn is 75D, the maximum weft density of 8010 model can reach 207pick / inch.the middle support bushing is intensively lubricated, the beating up counterweight balance system is added, and the beating up moving range and beating up angle are optimized. |
| 8 | Reed | Adopt the SUS304 stainless steel, polished. |
| 9 | Shedding | Dobby Shedding ,16PCS HaiJia reinforced Shaft. |
| 10 | Stripe | Tianqi wear-resistant thorn skin. |
| 11 | Weft Insertion | Two feeder and nozzle.8010 model will use ROJ brand feeder and nozzle from Korea or Japan. |
| Water pump and nozzle jetting device. | ||
| 13 | Lenno part | Selvage group from TAIWAN . The sliding seat is made of stainless steel and low-noise selvage group, with stable operation and long service life. |
| 14 | Let-off and take-up device | ROJ brand electronic let off system and take up system. |
| 15 | Electronic control system | The whole system is equipped with ROJ four in one system as standard, including electric control, weft storage, electronic let off and electronic take up. |
| 16 | Plunger joint | Shutai ceramic plunger. |
| 17 | Pump spring | From Japan brand |
| 18 | One-way valve | From Japan brand |
| 19 | Gripper | Double drive yarn gripper. |
| 20 | Oil seal and grease nipple | Both from TAIWAN brand |
| 21 | Cloth pressing roller | It is made of solid SUS304 stainless steel. |
| 22 | Nozzle | Made in Japan or Korea |
| 23 | Cutter part | Joint bearing made in TAIWAN. |
| 24 | Suction motor | Electric suction motor, combined with steam water separator, has stronger cloth drying effect. |
| 25 | Pressure stabilizing water tank | Double layer filter water tank |
| 26 | Painting | Haijia standard color, produced by pickling phosphating + electrophoresis + paint baking process, the antirust effect is enhanced. |
| 27 | Waterproof device | New aluminum alloy panel, new waterproof fog transparent waterproof cover plate, new stainless steel water tray. |
| 28 | Heald frame | Haijia enhanced. |
| 29 | Temple rod and guide plate | It is made of SUS304 stainless steel. |
| 30 | Panel board | Automatic data setting, recommended setting indication, optimim weaving condition information, automatic control, troubleshooting, self-diagnosis function operating data indication, maintenance data condition,7" touch screen. |
| 31 | Lubrication system | Manual type |
| 32 | Light detection weft | Light detection weft, plus signal amplifier |
| 33 | Rear beam | The reed width of 190cm and below adopts reinforced titanium plated aluminum alloy roll and ball + ball bearing combination to improve the bearing load of the shaft; The tension roller is provided with tilt angle display, and the roller seat is provided with high and low scale display, which makes the operation humanized |
| 34 | Cross beam | The front upper beam is made of rectangular steel pipe and welded with thickened steel plate. Haijia's unique design and special machining are adopted on both sides to make the U-shaped weft beating shaft more stable. The rear upper beam and front lower beam adopt thickened square pipe. |
| 35 | Temple | Five ring three rows of fine needle puncture (0.3mm) under the pressure of Temple (made fine denier fabric cloth smooth) South Korea Renhe or Jilong brand. |
| 36 | Measuring | Electronic measuring |
| 37 | False twist spindle | Pull type |
| 38 | Casting | Identify quality supplier, according to the standard drawings, guarantee the material and weight. |
| 39 | Code | Electronic code |
FAQ
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P could accepted
2: What certificates are available in Machinery?
A: For the certificate, we have CE,ISO
3: What about the delivery time?
A: 30-45 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment.
5. What about the Minimum Order Quantity?
A: The MOQ is 6 pcs
Connect to us
Mr.Othman
QINGDAO HAIJIA MACHINERY CO.,LTD
ADD:NO.39 HUANTAI DONG ROAD,WANGTAI TOWN HUANGDAO QINGDAO CITY CHINA
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}