| Customization: | Available |
|---|---|
| Type: | Water Jet Loom |
| Voltage: | 415V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
10% higher work efficiency with 10% lower consumption.
1. Wide range and high density(75D example)
Weft yarn range from 10D-1800D,weft yarn range from 10D-300D, and yarn denisty can achieve 127 pick/inch.
2. High speed
Design speed is 1200rpm;Cam shedding( 10 pcs frame):600-650rpm;
3. Low maitenance cost
Much more convenient maintenance operation, durable oil and filters to make longer maitenance period, 50% less expense
| No | Item | Configuration |
| 1 | Machine Model | HW-8010-230 with crank shedding,improved beating system based on TSUDOKOMA ZW-8100. |
| 2 | Useful reed space | The effective reed width of HW-8010-230 with crank shedding is 165cm-228cm |
| 3 | Wall board | We adopts HJ-8010 special heavy enhanced, according to TSUDAKOMA Drawing,HT220-230 standard material, large CNC precision machining wallboard. |
| 4 | Drive system | VEICHI motorized spindle system, used together with frequency converter, saves about 25% of annual power. |
| Push button switches for start,stop,inching and reverse inching. | ||
| 5 | Gear in the large box | AdoptingTaiWan(TTG)gear,ultra-quite,wear-resistant,low vibration and high precision. |
| 6 | Bearing in the large box | Bearing in the large box is swedish SKF or Germany FAG , Bearing out of the large box made in Japan. |
| 7 | Beating system | The specially treated U-shaped beating up shaft is adopted,If the yarn is 75D, the maximum weft density of 8010 model can reach 207pick / inch.the middle support bushing is intensively lubricated, the beating up counterweight balance system is added, and the beating up moving range and beating up angle are optimized. |
| 8 | Reed | Adopt the SUS304 stainless steel, polished. |
| 9 | Shedding | Crank Shedding ,6PCS HaiJia reinforced Shaft. |
| 10 | Stripe | Tianqi wear-resistant thorn skin. |
| 11 | Weft Insertion | Two feeder and nozzle.8010 model will use ROJ brand feeder and nozzle from Korea or Japan. |
| Water pump and nozzle jetting device. | ||
| 13 | Lenno part | Selvage group from TAIWAN . The sliding seat is made of stainless steel and low-noise selvage group, with stable operation and long service life. |
| 14 | Let-off and take-up device | ROJ brand electronic let off system and take up system. |
| 15 | Electronic control system | The whole system is equipped with ROJ four in one system as standard, including electric control, weft storage, electronic let off and electronic take up. |
| 16 | Plunger joint | Shutai ceramic plunger. |
| 17 | Pump spring | From Japan brand |
| 18 | One-way valve | From Japan brand |
| 19 | Gripper | Double drive yarn gripper. |
| 20 | Oil seal and grease nipple | Both from TAIWAN brand |
| 21 | Cloth pressing roller | It is made of solid SUS304 stainless steel. |
| 22 | Nozzle | Made in Japan or Korea |
| 23 | Cutter part | Joint bearing made in TAIWAN. |
| 24 | Suction motor | Electric suction motor, combined with steam water separator, has stronger cloth drying effect. |
| 25 | Pressure stabilizing water tank | Double layer filter water tank |
| 26 | Painting | Haijia standard color, produced by pickling phosphating + electrophoresis + paint baking process, the antirust effect is enhanced. |
| 27 | Waterproof device | New aluminum alloy panel, new waterproof fog transparent waterproof cover plate, new stainless steel water tray. |
| 28 | Heald frame | Haijia enhanced. |
| 29 | Temple rod and guide plate | It is made of SUS304 stainless steel. |
| 30 | Panel board | Automatic data setting, recommended setting indication, optimim weaving condition information, automatic control, troubleshooting, self-diagnosis function operating data indication, maintenance data condition,7" touch screen. |
| 31 | Lubrication system | Manual type |
| 32 | Light detection weft | Light detection weft, plus signal amplifier |
| 33 | Rear beam | The reed width of 190cm and below adopts reinforced titanium plated aluminum alloy roll and ball + ball bearing combination to improve the bearing load of the shaft; The tension roller is provided with tilt angle display, and the roller seat is provided with high and low scale display, which makes the operation humanized |
| 34 | Cross beam | The front upper beam is made of rectangular steel pipe and welded with thickened steel plate. Haijia's unique design and special machining are adopted on both sides to make the U-shaped weft beating shaft more stable. The rear upper beam and front lower beam adopt thickened square pipe. |
| 35 | Temple | Five ring three rows of fine needle puncture (0.3mm) under the pressure of Temple (made fine denier fabric cloth smooth) South Korea Renhe or Jilong brand. |
| 36 | Measuring | Electronic measuring |
| 37 | False twist spindle | Pull type |
| 38 | Casting | Identify quality supplier, according to the standard drawings, guarantee the material and weight. |
| 39 | Code | Electronic code |
Founded in 1995, Haijia Machinery is a professional manufacturer of shuttleless looms in China integrating R&D, manufacturing, sales, international trade and services. The main products include "Haijia" brand HW series water jet looms and HA series air jet looms. After the appraisal by China Textile Machinery Association, the technical level of water jet looms produced by Haijia Machinery has reached the international advanced level, and the market share has been leading the world for many years.
FAQ
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P could accepted
2: What certificates are available in Machinery?
A: For the certificate, we have CE,ISO
3: What about the delivery time?
A: 30-45 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment.
5. What about the Minimum Order Quantity?
A: The MOQ is 6 pcs
Connect to us
Ms.Caroline
QINGDAO HAIJIA MACHINERY CO.,LTD
ADD:NO.39 HUANTAI DONG ROAD,WANGTAI TOWN HUANGDAO QINGDAO CITY CHINA
){kind=link}