Our production advantages:
1,Longer running life,double times than other assembly machine
2,Energy saving.Use servo motor system can save power 25% each year
3,Labor saving.Same fabric,one labor can operate 24-28 sets HAIJIA machine,6-8sets more than others
4,Lower maintenance cost.The first three years can save maintenance cost 30% than others
Fabric Details Show
HW-8010-190 Plain Shedding Device Specification
| No |
Item |
Configuration |
| 1 |
Machine Model |
HW-8010-190 with crank shedding,improved beating system based on TSUDOKOMA ZW-8100. |
| 2 |
Useful reed space |
The effective reed width of HW-8010-190 with crank shedding is 125cm-188cm |
| 3 |
Wall board |
We adopts HJ-8010 special heavy enhanced, according to TSUDAKOMA
Drawing,HT220-230 standard material, large CNC precision machining wallboard. |
| 4 |
Drive system |
VEICHI motorized spindle system, used together with frequency converter, saves about 25% of annual power. |
| Push button switches for start,stop,inching and reverse inching. |
| 5 |
Gear in the large box |
AdoptingTaiWan(TTG)gear,ultra-quite,wear-resistant,low vibration and high precision. |
| 6 |
Bearing in the large box |
Bearing in the large box is swedish SKF or Germany FAG , Bearing out of the large box made in Japan. |
| 7 |
Beating system |
The specially treated U-shaped beating up shaft is adopted,If the yarn is 75D, the maximum weft density of 8010 model can reach 207pick / inch.the middle support bushing is intensively lubricated, the beating up counterweight balance system is added, and the beating up moving range and beating up angle are optimized. |
| 8 |
Reed |
Adopt the SUS304 stainless steel, polished. |
| 9 |
Shedding |
Crank Shedding ,6PCS HaiJia reinforced Shaft. |
| 10 |
Stripe |
Tianqi wear-resistant thorn skin. |
| 11 |
Weft Insertion |
Two feeder and nozzle.8010 model will use ROJ brand feeder and nozzle from Korea or Japan. |
| Water pump and nozzle jetting device. |
| 13 |
Lenno part |
Selvage group from TAIWAN . The sliding seat is made of stainless steel and low-noise selvage group, with stable operation and long service life. |
| 14 |
Let-off and take-up device |
ROJ brand electronic let off system and take up system. |
| 15 |
Electronic control system |
The whole system is equipped with ROJ four in one system as standard, including electric control, weft storage, electronic let off and electronic take up. |
| 16 |
Plunger joint |
Shutai ceramic plunger. |
| 17 |
Pump spring |
From Japan brand |
| 18 |
One-way valve |
From Japan brand |
| 19 |
Gripper |
Double drive yarn gripper. |
| 20 |
Oil seal and grease nipple |
Both from TAIWAN brand |
| 21 |
Cloth pressing roller |
It is made of solid SUS304 stainless steel. |
| 22 |
Nozzle |
Made in Japan or Korea |
| 23 |
Cutter part |
Joint bearing made in TAIWAN. |
| 24 |
Suction motor |
Electric suction motor, combined with steam water separator, has stronger cloth drying effect. |
| 25 |
Pressure stabilizing water tank |
Double layer filter water tank |
| 26 |
Painting |
Haijia standard color, produced by pickling phosphating + electrophoresis + paint baking process, the antirust effect is enhanced. |
| 27 |
Waterproof device |
New aluminum alloy panel, new waterproof fog transparent waterproof cover plate, new stainless steel water tray. |
| 28 |
Heald frame |
Haijia enhanced. |
| 29 |
Temple rod and guide plate |
It is made of SUS304 stainless steel. |
| 30 |
Panel board |
Automatic data setting, recommended setting indication, optimim weaving
condition information, automatic control, troubleshooting, self-diagnosis function operating data indication, maintenance data condition,7" touch screen. |
| 31 |
Lubrication system |
Manual type |
| 32 |
Light detection weft |
Light detection weft, plus signal amplifier |
| 33 |
Rear beam |
The reed width of 190cm and below adopts reinforced titanium plated aluminum alloy roll and ball + ball bearing combination to improve the bearing load of the shaft; The tension roller is provided with tilt angle display, and the roller seat is provided with high and low scale display, which makes the operation humanized |
| 34 |
Cross beam |
The front upper beam is made of rectangular steel pipe and welded with thickened steel plate. Haijia's unique design and special machining are adopted on both sides to make the U-shaped weft beating shaft more stable. The rear upper beam and front lower beam adopt thickened square pipe. |
| 35 |
Temple |
Five ring three rows of fine needle puncture (0.3mm) under the pressure of Temple (made fine denier fabric cloth smooth) South Korea Renhe or Jilong brand. |
| 36 |
Measuring |
Electronic measuring |
| 37 |
False twist spindle |
Pull type |
| 38 |
Casting |
Identify quality supplier, according to the standard drawings, guarantee the material and weight. |
| 39 |
Code |
Electronic code |
Water Jet Loom with Plain Shedding Details Show
Picking Details
Advantages we have:
A. We are the top manufacturer with great experience in textile machinery since 1995.
B. Professional service team and sales department at your city.
C. 7*24 hours calling&email service for you, all the questions will be solved within 24 hours
Benefit you get:
A. Top quality---Every spare parts is carefully inspected before assembly on machines.
B. Reasonable price- We offer you the best price with excellent quality
C. Good service---12 months warranty for the whole machine, have after-sales service center,engineers help you to solve all the problems at the first time.
D. Short delivery---20-40 days after signed the S/C.
Company Introduction
Qingdao Haijia Machinery Co., Ltd. was established in 1995, since its establishment has been focused on the development of manufacturing water jet loom, is currently set research and development, manufacturing, sales and service as one of professional manufacturer of the largest water jet loom, is the participation of China water jet loom industry standards makers. Water jet loom sales for , the industry's first 13 consecutive years, is China's textile machinery governing unit.
Good surface quality, wide range of fabrics. Haijia heavy water jet loom has a number of invention patents, utility model patents. Such as reinforcement of beam design, from the high-speed operation of the air jet loom to maintain the stability of the characteristics, which makes the machine more stable, low defective rate and the quality of cloth. For example, weft design optimization, optimization of the beating angle, the beating is stable, smooth cloth. The optimization of the design is also reflected in the fabric of a wider range of adaptability.
The Workshop in Our Factory Introduction
Advanced Manufacturing Workshop
The company is equipped with advanced CNC equipment, high-precision imported processing center, and adopts information management methods to achieve independent precision machining of precision parts of key parts of the loom. The processing accuracy of key parts and components reaches 0.01mm,greatly improving the whole machine Stability and startup efficiency.At the same time, we have introduced MES system to collect the processing information and equipment operation of all equipment in the processing workshop, so that managers can more intuitively understand the output of the processing workshop and effectively shorten the production cycle.
Three Dimensions Warehouse
The company is equipped with an automated three-dimensional warehouse, which uses computers to accurately manage the goods information, reducing possible errors in the process of storing goods and improving work efficiency. At the same time, the three-dimensional automated warehouse realizes motorization in the transportation of goods in and out of the warehouse, which is safe and reliable in handling goods, and reduces the damage rate of goods in the process of handling.
Quality Detection Workshop
The company adopts advanced calibration and testing equipment to ensure the qualified rate of products produced in each process and strictly control the quality fluctuation, so as to ensure the product quality of the whole machine. Improve the production process through inspection, reduce the quality cost and enhance the comprehensive competitiveness of products.
Advanced Spraying Workshop
Our spraying workshop adopts the same electrophoretic spraying technology as Tsudakoma, and is equipped with product automatic spraying production line and spraying robot independently developed by the company. The use of the new equipment can make the workpiece surface evenly and completely covered with a protective paint film, so as to ensure that there will be no incomplete paint film coverage and uneven paint film thickness. At the same time, the application of electrophoretic spraying technology significantly improves the anti rust and anti-corrosion ability of the workpiece. The service life of the loom is greatly improved.
Advanced Assembly Workshop
On the basis of the whole machine assembly line, the company introduced Siemens to intelligentize the loom assembly, and realized the "mobile people do not move" production mode, that is, the pulsating production mode. Through strict quality management, fine differentiation of assembly process flow, fastening connectors with special tools with fixed torque, and strict inspection of production facilities, the quality of the overall loom is improved.
Our Honor
Exhibition Site
FAQ
Q:Are you factory or trade company?
A:We are factory with trade department.
Q:What kind of product do you make?
A:Water jet loom and air jet loom.
Q:Do you have engineer work available in abroad?
A:Yes,we have more than 20 engineers for sales service in domestic and abroad.
Q:How can we go to your factory?
A:Arrive at Qingdao air port,take two hour to our factory by car.We will pick you up from air port.
Q: Whether the machine price can be more discount?
We should make sure that the quality of our products matches the price.We welcome you to negotiate with us and get a satisfactory return, and provide customers with a satisfactory price and an acceptable price.
Q:How about your machine quality?We are worry about the quality.
We have studied the technology and our design, including the structure and detailed safety and accuracy, has been greatly improved to meet the CE standard or more stringent standards. We have machines in about 30 countries around the world. And where our machines are, has a good reputation and end user satisfaction. We always provide high quality machines. The foreign market is more important and difficult than the domestic market. Because of the high communication time cost after sales, our machines always have strict quality standards to ensure that the machines can exceed the actual warranty period. In this way, we will save a lot of energy and think ahead for the customer.
Connect with Ms.Caroline
QINGDAO HAIJIA MACHINERY CO.,LTD
ADD:NO.39 HUANTAI DONG ROAD,WANGTAI TOWN HUANGDAO QINGDAO CITY CHINA
MOB:+86-13969840070
Audited Supplier 
){kind=link}